American JIC 74° Cone Seal Fitting
16711 JIC MALE 74° CONE SEAT
SAE J514 thread standard;
Male connection port;
74° flare seat on the male fittings;
Straight body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 16711 for braid; 16712 for spiral;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | |||
|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | ||
| 16711-04-03 | 7/16"x20 | 5 | 03 | 26 | 14 | 12 |
| 16711-04-04 | 7/16"x20 | 6 | 04 | 26.5 | 14 | 12 |
| 16711-05-04 | 1/2"x20 | 6 | 04 | 26.5 | 14 | 14 |
| 16711-05-05 | 1/2"x20 | 8 | 05 | 26.5 | 14 | 14 |
| 16711-05-06 | 1/2"x20 | 10 | 06 | 26.5 | 14 | 17 |
| 16711-06-04 | 9/16"x18 | 6 | 04 | 26.5 | 14.1 | 17 |
| 16711-06-05 | 9/16"x18 | 8 | 05 | 26.5 | 14.1 | 17 |
| 16711-06-06 | 9/16"x18 | 10 | 06 | 26.5 | 14.1 | 17 |
| 16711-08-06 | 3/4"x16 | 10 | 06 | 31.5 | 16.7 | 22 |
| 16711-08-08 | 3/4"x16 | 12 | 08 | 32 | 16.7 | 22 |
| 16711-10-06 | 7/8"X14 | 10 | 06 | 33.5 | 19.3 | 24 |
| 16711-10-08 | 7/8"X14 | 12 | 08 | 34 | 19.3 | 24 |
| 16711-10-10 | 7/8"X14 | 16 | 10 | 35 | 19.3 | 24 |
| 16711-12-08 | 1.1/16"x12 | 12 | 08 | 38.5 | 21.9 | 30 |
| 16711-12-10 | 1.1/16"x12 | 16 | 10 | 39.5 | 21.9 | 30 |
| 16711-12-12 | 1.1/16"x12 | 20 | 12 | 40 | 21.9 | 30 |
| 16711-12-16 | 1.1/16"x12 | 25 | 16 | 42 | 21.9 | 30 |
| 16711-14-10 | 1.3/16"x12 | 16 | 10 | 41.5 | 22.6 | 32 |
| 16711-14-12 | 1.3/16"x12 | 20 | 12 | 40.5 | 22.6 | 32 |
| 16711-16-12 | 1.5/16"x12 | 20 | 12 | 43 | 23.1 | 36 |
| 16711-16-16 | 1.5/16"x12 | 25 | 16 | 43.5 | 23.1 | 36 |
| 16711-20-16 | 1.5/8"x12 | 25 | 16 | 47 | 24.3 | 46 |
| 16711-20-20 | 1.5/8"x12 | 32 | 20 | 47.5 | 24.3 | 46 |
| 16711-24-20 | 1.7/8"x12 | 32 | 20 | 53 | 27.5 | 50 |
| 16711-24-24 | 1.7/8"x12 | 40 | 24 | 53 | 27.5 | 50 |
| 16711-32-32 | 1.1/2"x12 | 50 | 32 | 62 | 33.9 | 65 |
16711L JIC MALE 74° CONE
SAE J514 thread standard;
Male connection port;
74° flare seat on the male fittings;
Straight body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 16011 for braid; 16012 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | |||
|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | ||
| 16711L-04-04 | 7/16"x20 | 6 | 04 | 43 | 30.5 | 17 |
| 16711L-05-04 | 1/2"x20 | 6 | 04 | 43 | 30.5 | 19 |
| 16711L-05-05 | 1/2"x20 | 8 | 05 | 43 | 30.5 | 19 |
| 16711L-06-04 | 9/16"x18 | 6 | 04 | 47 | 32.5 | 22 |
| 16711L-06-05 | 9/16"x18 | 8 | 05 | 47 | 32.5 | 22 |
| 16711L-06-06 | 9/16"x18 | 10 | 06 | 47 | 32.5 | 22 |
| 16711L-08-06 | 3/4"x16 | 10 | 06 | 51 | 36.5 | 24 |
| 16711L-08-08 | 3/4"x16 | 12 | 08 | 51.5 | 36.5 | 24 |
| 16711L-10-06 | 7/8"x14 | 10 | 06 | 56.5 | 40 | 30 |
| 16711L-10-08 | 7/8"x14 | 12 | 08 | 57 | 40 | 30 |
| 16711L-10-10 | 7/8"x14 | 16 | 10 | 58 | 40 | 30 |
| 16711L-12-08 | 1.1/16"x12 | 12 | 08 | 63 | 44.5 | 36 |
| 16711L-12-10 | 1.1/16"x12 | 16 | 10 | 64 | 44.5 | 36 |
| 16711L-12-12 | 1.1/16"x12 | 20 | 12 | 64 | 44.5 | 36 |
| 16711L-16-12 | 1.5/16"x12 | 20 | 12 | 66 | 44.5 | 41 |
| 16711L-16-16 | 1.5/16"x12 | 25 | 16 | 67 | 44.5 | 41 |
| 16711L-20-16 | 1.5/8"x12 | 25 | 16 | 70.5 | 45.7 | 50 |
| 16711L-20-20 | 1.5/8"x12 | 32 | 20 | 71.2 | 45.7 | 50 |
| 16711L-24-20 | 1.7/8"x12 | 32 | 20 | 71.5 | 46 | 55 |
| 16711L-24-24 | 1.7/8"x12 | 40 | 24 | 71.5 | 46 | 55 |
26711 JIC FEMALE 74° CONE SEAT
SAE J514 thread standard;
Female connection port;
74° inverted flare on the female fittings;
Straight body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 16011 for braid; 16012 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | |||
|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | ||
| 26711-04-03 | 7/16"x20 | 5 | 03 | 14.5 | 9 | 15 |
| 26711-04-04 | 7/16"x20 | 6 | 04 | 15 | 9 | 15 |
| 26711-05-04 | 1/2"x20 | 6 | 04 | 16 | 9.5 | 17 |
| 26711-05-05 | 1/2"x20 | 8 | 05 | 16 | 9.5 | 17 |
| 26711-05-06 | 1/2"x20 | 10 | 06 | 16.5 | 9.5 | 17 |
| 26711-06-04 | 9/16"x18 | 6 | 04 | 16.5 | 10.5 | 19 |
| 26711-06-05 | 9/16"x18 | 8 | 05 | 16 | 10.5 | 19 |
| 26711-06-06 | 9/16"x18 | 10 | 06 | 16.5 | 10.5 | 19 |
| 26711-06-08 | 9/16"x18 | 12 | 08 | 16 | 10.5 | 19 |
| 26711-08-06 | 3/4"x16 | 10 | 06 | 18 | 11 | 24 |
| 26711-08-08 | 3/4"x16 | 12 | 08 | 18.5 | 11 | 24 |
| 26711-08-10 | 3/4"x16 | 16 | 10 | 19.5 | 11 | 24 |
| 26711-10-08 | 7/8"x14 | 12 | 08 | 19.5 | 13 | 27 |
| 26711-10-10 | 7/8"x14 | 16 | 10 | 20.5 | 13 | 27 |
| 26711-10-12 | 7/8"x14 | 20 | 12 | 20 | 13 | 7 |
| 26711-12-08T | 1.1/16"x12 | 12 | 08 | 19 | 15 | 32 |
| 26711-12-10 | 1.1/16"x12 | 16 | 10 | 21.5 | 15 | 32 |
| 26711-12-12 | 1.1/16"x12 | 20 | 12 | 21.5 | 15 | 32 |
| 26711-12-16 | 1.1/16"x12 | 25 | 16 | 23.5 | 15 | 32 |
| 26711-14-12 | 1.3/16"x12 | 20 | 12 | 21.5 | 15 | 36 |
| 26711-16-12T | 1.5/16"x12 | 20 | 12 | 18.5 | 16 | 41 |
| 26711-16-16 | 1.5/16"x12 | 25 | 16 | 24.5 | 16 | 41 |
| 26711-16-20 | 1.5/16"x12 | 32 | 20 | 24 | 16 | 41 |
| 26711-20-16T | 1.5/8"x12 | 25 | 16 | 23 | 17 | 50 |
| 26711-20-20W | 1.5/8"x12 | 32 | 20 | 26 | 17 | 50 |
| 26711-24-20W | 1.7/8"x12 | 32 | 20 | 26.5 | 20 | 55 |
| 26711-24-24W | 1.7/8"x12 | 40 | 24 | 26.5 | 20 | 55 |
| 26711-32-24T | 2.1/2"x12 | 40 | 24 | 27 | 23.5 | 75 |
| 26711-32-32T | 2.1/2"x12 | 50 | 32 | 27 | 23.5 | 75 |
26711D JIC FEMALE 74° CONE SEAT DOUBLE HEXAGON
SAE J514 thread standard;
Female connection port;
74° inverted flare on the female fittings;
Straight body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 16011 for braid; 16012 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | S2 | ||
| 26711D-04-04 | 7/16"x20 | 6 | 04 | 20 | 9 | 17 | 15 |
| 26711D-05-04 | 1/2"x20 | 6 | 04 | 21 | 9.5 | 17 | 17 |
| 26711D-06-04 | 9/16"x18 | 6 | 04 | 21 | 10.5 | 19 | 19 |
| 26711D-06-06 | 9/16"x18 | 10 | 06 | 21 | 10.5 | 19 | 19 |
| 26711D-08-06 | 3/4"x16 | 10 | 06 | 25 | 11 | 24 | 24 |
| 26711D-08-08 | 3/4"x16 | 12 | 08 | 24.5 | 11 | 24 | 24 |
| 26711D-08-10 | 3/4"x16 | 16 | 10 | 25.5 | 11 | 24 | 24 |
| 26711D-10-08 | 7/8"x14 | 12 | 08 | 28 | 13 | 27 | 27 |
| 26711D-10-10 | 7/8"x14 | 16 | 10 | 29 | 13 | 27 | 27 |
| 26711D-12-12 | 1.1/16"x12 | 20 | 12 | 31.5 | 15 | 32 | 32 |
| 26711D-16-12 | 1.5/16"x12 | 20 | 12 | 33.5 | 16 | 41 | 41 |
| 26711D-16-16 | 1.5/16"x12 | 25 | 16 | 34.5 | 16 | 41 | 41 |
| 26711D-16-20 | 1.5/16"x12 | 32 | 20 | 36.5 | 16 | 41 | 41 |
| 26711D-20-20W | 1.7/16"x12 | 32 | 20 | 41 | 17 | 50 | 50 |
26711D-SM JIC FEMALE 74° CONE SEAT DOUBLE HEXAGON
SAE J514 thread standard;
Female connection port;
74° inverted flare on the female fittings;
Straight body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 16011 for braid; 16012 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | S2 | ||
| 26711D-04-04SM | 7/16"x20 | 6 | 04 | 20 | 9 | 12 | 15 |
| 26711D-05-04SM | 1/2"x20 | 6 | 04 | 20.5 | 9.5 | 12 | 17 |
| 26711D-06-04SM | 9/16"X18 | 6 | 04 | 21 | 10.5 | 14 | 19 |
| 26711D-06-06SM | 9/16"X18 | 10 | 06 | 21 | 10.5 | 17 | 19 |
| 26711D-08-06SM | 3/4"x16 | 10 | 06 | 23 | 11 | 19 | 24 |
| 26711D-08-08SM | 3/4"x16 | 12 | 08 | 24.5 | 11 | 22 | 24 |
| 26711D-08-10SM | 3/4"x16 | 16 | 10 | 25.5 | 11 | 22 | 24 |
| 26711D-10-08SM | 7/8"x14 | 12 | 08 | 26 | 13 | 22 | 27 |
| 26711D-10-10SM | 7/8"x14 | 16 | 10 | 27 | 13 | 22 | 27 |
| 26711D-12-12SM | 1.1/16"x12 | 20 | 12 | 31.5 | 15 | 27 | 32 |
| 26711D-16-12SM | 1.5/16"x12 | 20 | 12 | 31.5 | 16 | 32 | 41 |
| 26711D-16-16SM | 1.5/16"x12 | 25 | 16 | 33 | 16 | 32 | 41 |
| 26711D-20-20WSM | 1.7/16"x12 | 32 | 20 | 39 | 17 | 41 | 50 |
26741 45° JIC MALE 74° CONE SEAT
SAE J514 thread standard;
Female connection port;
74° inverted flare on the female fittings;
45° eblow body;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 16011 for braid; 16012 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | H | S2 | ||
| 26741-04-03 | 7/16"x20 | 5 | 03 | 37.6 | 9 | 17.2 | 15 |
| 26741-04-04 | 7/16"x20 | 6 | 04 | 40.2 | 9 | 18.1 | 15 |
| 26741-05-04 | 1/2"x20 | 6 | 04 | 40.5 | 9.5 | 18.5 | 17 |
| 26741-05-05 | 1/2"x20 | 8 | 05 | 42.7 | 9.5 | 19.3 | 17 |
| 26741-05-06 | 1/2"x20 | 10 | 06 | 44.6 | 9.5 | 20.3 | 17 |
| 26741-06-04 | 9/16"x18 | 6 | 04 | 40.5 | 10.5 | 18.5 | 19 |
| 26741-06-05 | 9/16"x18 | 8 | 05 | 42.6 | 10.5 | 19.3 | 19 |
| 26741-06-06 | 9/16"x18 | 10 | 06 | 44.3 | 10.5 | 20 | 19 |
| 26741-08-06 | 3/4"x16 | 10 | 06 | 45.7 | 11 | 21.4 | 24 |
| 26741-08-08 | 3/4"x16 | 12 | 08 | 57.9 | 11 | 22.9 | 24 |
| 26741-10-08 | 7/8"x14 | 12 | 08 | 58.9 | 13 | 24 | 27 |
| 26741-10-10 | 7/8"x14 | 16 | 10 | 69.6 | 13 | 25.3 | 27 |
| 26741-10-12 | 7/8"x14 | 20 | 12 | 75.7 | 13 | 28.9 | 27 |
| 26741-12-08 | 1.1/16"x12 | 12 | 08 | 60 | 15 | 25.1 | 32 |
| 26741-12-10 | 1.1/16"x12 | 16 | 10 | 70.7 | 15 | 26.4 | 32 |
| 26741-12-12 | 1.1/16"x12 | 20 | 12 | 76.8 | 15 | 30 | 32 |
| 26741-14-12 | 1.3/16"x12 | 20 | 12 | 77.4 | 15 | 30 | 36 |
| 26741-16-12 | 1.5/16"x12 | 20 | 12 | 77.4 | 16 | 30 | 41 |
| 26741-16-16 | 1.5/16"x12 | 25 | 16 | 85.7 | 16 | 31.5 | 41 |
| 26741-20-20W | 1.5/8"x12 | 32 | 20 | 95.9 | 17 | 35.2 | 50 |
| 26741-24-20W | 1.7/8"x12 | 32 | 20 | 100.9 | 20 | 40.1 | 55 |
| 26741-24-24W | 1.7/8"x12 | 40 | 24 | 114.8 | 20 | 44.1 | 55 |
| 26741-32-32W | 2.1/2"x12 | 50 | 32 | 135.9 | 23.5 | 51.6 | 75 |
26791 90° JIC FEMALE 74° CONE SEAT
SAE J514 thread standard;
Female connection port;
74° inverted flare on the female fittings;
90° eblow body;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 16011 for braid; 16012 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | H | S2 | ||
| 26791-04-03 | 7/16"x20 | 5 | 03 | 26.5 | 9 | 30.5 | 15 |
| 26791-04-04 | 7/16"x20 | 6 | 04 | 30 | 9 | 33.5 | 15 |
| 26791-05-04 | 1/2"x20 | 6 | 04 | 30 | 9.5 | 34 | 17 |
| 26791-05-05 | 1/2"x20 | 8 | 05 | 33 | 9.5 | 37 | 17 |
| 26791-05-06 | 1/2"x20 | 10 | 06 | 35.3 | 10.5 | 39.3 | 17 |
| 26791-06-04 | 9/16"x18 | 6 | 04 | 30 | 10.5 | 34 | 19 |
| 26791-06-05 | 9/16"x18 | 8 | 05 | 30 | 10.5 | 37 | 19 |
| 26791-06-06 | 9/16"x18 | 10 | 06 | 35.3 | 10.5 | 39.3 | 19 |
| 26791-06-08 | 9/16"x18 | 12 | 08 | 35.8 | 11 | 39.8 | 19 |
| 26791-08-06 | 3/4"x16 | 10 | 06 | 35.3 | 11 | 41.3 | 24 |
| 26791-08-08 | 3/4"x16 | 12 | 08 | 41 | 11 | 47.5 | 24 |
| 26791-08-10 | 3/4"x16 | 16 | 10 | 49 | 13 | 47.5 | 24 |
| 26791-10-08 | 7/8"x14 | 12 | 08 | 41 | 13 | 48 | 27 |
| 26791-10-10 | 7/8"x14 | 16 | 10 | 56 | 13 | 52.5 | 27 |
| 26791-10-12 | 7/8"x14 | 20 | 12 | 64.9 | 15 | 62 | 27 |
| 26791-12-08 | 1.1/16'x12 | 12 | 08 | 41 | 15 | 49.5 | 32 |
| 26791-12-10 | 1.1/16'x12 | 16 | 10 | 56 | 15 | 54 | 32 |
| 26791-12-12 | 1.1/16'x12 | 20 | 12 | 65.5 | 15 | 63.5 | 32 |
| 26791-12-16 | 1.1/16'x12 | 25 | 74 | 15 | 63.5 | 32 | |
| 26791-14-12 | 1.3/16'x12 | 20 | 16 | 65.5 | 15 | 63.5 | 36 |
| 26791-16-12 | 1.5/16'x12 | 20 | 12 | 65.5 | 16 | 63.5 | 41 |
| 26791-16-16 | 1.5/16'x12 | 25 | 16 | 76.7 | 16 | 70 | 41 |
| 26791-20-20W | 1.5/8"x12 | 32 | 20 | 91.5 | 17 | 80.5 | 50 |
| 26791-24-20W | 1.7/8"x12 | 32 | 20 | 91.5 | 20 | 80.5 | 55 |
| 26791-24-24W | 1.7/8"x12 | 40 | 24 | 109.4 | 20 | 94 | 55 |
| 26791-32-32W | 2.1/2"x12 | 50 | 32 | 133.1 | 23.5 | 121.8 | 75 |
26791-H 90° JIC FEMALE 74° CONE SEAT
SAE J514 thread standard;
Female connection port;
74° inverted flare on the female fittings;
90° eblow body;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 16011 for braid; 16012 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | H | S2 | ||
| 26791-06-04(H66) | 9/16"x18 | 6 | 04 | 30 | 10.5 | 66 | 19 |
| 26791-08-06(H78) | 3/4"x16 | 10 | 06 | 35.3 | 11 | 78 | 24 |
| 26791-10-08(H86) | 7/8"x14 | 12 | 08 | 41 | 13 | 86 | 27 |
| 26791-12-12(H135) | 1.1/16"x12 | 20 | 12 | 65.5 | 15 | 135 | 32 |
| 26791-16-16(H140) | 1.5/16"x12 | 25 | 16 | 76.7 | 16 | 140 | 41 |
26791K 90° JIC COMPACT FEMALE 74° CONE SEAT
SAE J514 thread standard;
Female connection port;
74° inverted flare on the female fittings;
90° eblow body;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 16011 for braid; 16012 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | |||||
|---|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | H | S1 | S2 | ||
| 26791K-04-04 | 7/16"x20 | 6 | 04 | 17.5 | 9 | 18 | 11 | 15 |
| 26791K-06-04 | 9/16"x18 | 6 | 04 | 20 | 10.5 | 20.5 | 14 | 19 |
| 26791K-06-06 | 9/16"x18 | 10 | 06 | 20 | 10.5 | 20.5 | 16 | 19 |
| 26791K-08-06 | 3/4"x16 | 10 | 06 | 23 | 11 | 25 | 19 | 24 |
| 26791K-08-08 | 3/4"x16 | 12 | 08 | 23.5 | 11 | 25 | 22 | 24 |
| 26791K-10-08 | 7/8"x14 | 12 | 08 | 25 | 13 | 27 | 22 | 27 |
| 26791K-10-10 | 7/8"x14 | 16 | 10 | 25 | 13 | 27 | 22 | 27 |
| 26791K-12-12 | 1.1/16"x12 | 20 | 12 | 29 | 15 | 31 | 27 | 32 |
| 26791K-16-16 | 1.5/16"x12 | 25 | 16 | 43 | 16 | 34.3 | 33 | 41 |