EN857 1SC Compact Hydraulic Hose | 1-Wire Braided Flexible Hose
Compact hydraulic hose construction with high pressure resistant and small bending radius. Impulse tested according EN857 Standard.
EN857 1SC hydraulic hose has similar performance as its counterpart SAE 100R1 besides tighter radii, Single wire braided 1SC high pressure hydraulic hose is suitable for high pressure conditions where tight routing is required.
EN857 1SC Coompact Hydraulic Hose Features:
Inner tube: Oil resistant synthetic rubber;
Reinforcement: One braid of high tensile steel wire;
Cover: Weather and oil resistant synthetic rubber;
Main application: Suitable for convey low/medium pressure service with tight bends of oil/water based hydraulic fluids.
EN857 1SC Coompact Hydraulic Hose Specifications:
| Hose Type | I.D | O.D | W.P | B.P | B.R | W.T | |||
|---|---|---|---|---|---|---|---|---|---|
| Dash | Inch | mm | mm | Mpa | PSI | Mpa | PSI | mm | kg/m |
| 1SC-04 | 1/4" | 6.4 | 13.5 | 22.5 | 3263 | 90 | 13050 | 75 | 0.173 |
| 1SC-05 | 5/16" | 7.9 | 14.5 | 21.5 | 3118 | 85 | 12325 | 85 | 0.194 |
| 1SC-06 | 3/8" | 9.5 | 16.9 | 18.0 | 2610 | 71 | 10440 | 90 | 0.244 |
| 1SC-08 | 1/2" | 12.7 | 20.4 | 16.0 | 2320 | 64 | 9180 | 130 | 0.328 |
| 1SC-10 | 5/8" | 15.9 | 23.0 | 13.0 | 1885 | 52 | 7540 | 150 | 0.416 |
| 1SC-12 | 3/4" | 19.1 | 26.7 | 10.5 | 1523 | 42 | 6090 | 180 | 0.6 |
| 1SC-16 | 1" | 25.4 | 34.9 | 8.7 | 1262 | 35.2 | 5075 | 230 | 0.713 |
Sinopulse： Professional Hydraulic Hoses & Fittings Supplier you deserve depending on.
Raw Materials Management:
Original Source:
Our main raw materials are purchased from the top supplier in the international market, Like Sinopec， Samsung, BASF, and authoritative manufacturers in the domestic market.
Check after purchase:
Once a new batch of material is shipped to our factory, we will take samples to check them strictly according to our professional standards, if they can’t pass, the goods will be sent back.
Test beforehand with real production requirements.
We will combine relative materials according to our producing recipe to have an experiment and determine the production condition.
Fabrication Precess Management:
Equipment Improvement:
We focus on the development of manufacturing equipment, Join machines, Braiding machines, and Spiral machines. The key facilities have been iterated several times since we began to start our careers.
Quality Tracking Card:
Quality tracking card is exclusively dedicated to recording the key parameter in the fabrication process, every indicator must be controlled within the tolerance range of standards.
Pressure test and package
Pressure Test:
When the batch of hydraulic hose is finished, it must be tested under 2 times the working pressure for more than 30 seconds. If it passes the exam, it can be packed and shipped out. If not, It will be cut into an unfixed dimension for sale.
Package:
Our hydraulic hoses are normally packed with plastic films or woven bags.
Each package is labeled with detailed information on the product parameters, brand, name, diameter, length, and so on, products ID is included in case of checking.
Related Products
SAE 100R16
SAE 100R16 Compact Hydraulic Hose SAE 100R16 Hydraulic Hose | 2-Wire Braided Flexible Hose | Compact Hydraulic Hose Compact hydraulic hose construction with high pressure
EN857 1SC
EN857 1SC Compact Hydraulic Hose EN857 1SC Compact Hydraulic Hose | 1-Wire Braided Flexible Hose Compact hydraulic hose construction with high pressure resistant and small
EN857 2SC
EN857 2SC Compact Hydraulic Hose EN857 2SC Compact Hydraulic Hose | 2-Wire Braided Flexible Hose Compact hydraulic hose construction with high pressure resistant and small