SAE 100R2AT / EN853 2SN Hydraulic Hose

SAE 100R2AT / EN 853 2SN | 2-Wire Braided Hose | Double Steel Braided Hydraulic Hose

SAE 100R2AT, DIN EN853 2SN, has two high tensile steel wire braided as reinforcement layers, It bears up to 40Mpa when some low-diameter hoses are selected.

They are suitable for medium to high-pressure applications with low-impulse scenarios such as engineering construction machinery.


SAE 100R2AT / EN 853 2SN Hydraulic Hose Features:

Inner tube: Oil resistant synthetic rubber.

Reinforcement: two layers of high tensile braided steel wire separated by synthetic rubber layer.

Cover: high quality synthetic rubber, abrasion resistant, corrosion resistant, weather, ozone, aging,sunlight resistant.

Safey factor: 4:1.

Max pressure: 40Mpa.

Diameter Range: 3/16″ ~ 2″.


Petroleum base hydraulic fluids and lubricating oils.

High pressure hydraulic system, construction agriculture machinery.

SAE 100R2AT / EN 853 2SN Hydraulic Hose Specifications:


Sinopulse: Professional Hydraulic Hoses & Fittings Supplier you deserve depending on.

hydraulic hose raw materials

Raw Materials Management:

Original Source:

Our main raw materials are purchased from the top supplier in the international market, Like Sinopec, Samsung, BASF, and authoritative manufacturers in the domestic market.

Check after purchase:

Once a new batch of material is shipped to our factory, we will take samples to check them strictly according to our professional standards, if they can’t pass, the goods will be sent back.

Test beforehand with real production requirements.

We will combine relative materials according to our producing recipe to have an experiment and determine the production condition.

Fabrication Precess Management:

Equipment Improvement:

We focus on the development of manufacturing equipment, Join machines, Braiding machines, and Spiral machines. The key facilities have been iterated several times since we began to start our careers. 

Quality Tracking Card:

Quality tracking card is exclusively dedicated to recording the key parameter in the fabrication process, every indicator must be controlled within the tolerance range of standards.

Pressure test and package

Pressure Test:

When the batch of hydraulic hose is finished, it must be tested under 2 times the working pressure for more than 30 seconds. If it passes the exam, it can be packed and shipped out. If not, It will be cut into an unfixed dimension for sale.


Our hydraulic hoses are normally packed with plastic films or woven bags. 

Each package is labeled with detailed information on the product parameters, brand, name, diameter, length, and so on, products ID is included in case of checking.

    Contact us Now!

    Related Products
    SAE 100R1AT EN853 1SN

    SAE 100R1AT

    SAE 100R1AT /EN 853 1SN Hydraulic Hose SAE 100R1AT / EN 853 1SN | 1-Wire Braided Hose | Single Steel Wire Braided Hydraulic Hose This

    SAE 100R5 Sinopulse

    SAE 100R5

    SAE 100R5 Hydraulic Hose SAE 100R5 Hydraulic Hose | Textile Covered Single Steel Braided Hydraulic Hose SAE 100R5 is single wire braid, textile covered hydraulic

    jet washer hose sinopulse

    Pressure Washer Hose

    WR1SN/WR2SN High Pressure Jet Washer Hose Pressure Washer Hose | Jet Washer Hose | WR1SN/WR2SN Jet washer hose is specially designed to use high-pressure water