SAE 100R5 Hydraulic Hose | Textile Covered Single Steel Braided Hydraulic Hose
SAE 100R5 is single wire braid, textile covered hydraulic hose.
SAE 100R5 is for medium-pressure use, including air and water, the petroleum-based hydraulic fluid used in air brakes, power steering, turbo oil lines, tilt cab cylinders, transmission coolant, and filtration lines.
SAE 100R5 Hydraulic Hose Features:
Inner tube: Oil resistance synthetic rubber;
Reinforcement: Single wire braid reinforcement.
Cover: A fiber braided Cover
Tempreture range: -40°C ~ +100°C
Operating temperatures in excess of +100℃ with petroleum base hydraulic fluids may materially reduce the life of the hose.
Application: Suitable for oil or water based hydraulic fluids.
SAE 100R5 hydraulic hose is premium choice for applications where need medium pressure and impulse fatigue resistance. Tight bend radius makes the routing compact and effective.
SAE 100R5 Hydraulic Hose Specifications:
| Hose Type | I.D | O.D | W.P | B.P | B.R | W.T | |||
|---|---|---|---|---|---|---|---|---|---|
| Dash | Inch | mm | mm | Mpa | PSI | Mpa | PSI | mm | kg/m |
| R16-04 | 1/4" | 6.4 | 13.5 | 35.0 | 5075 | 140 | 20300 | 50 | 0.2 |
| R16-05 | 5/16" | 7.9 | 15.1 | 30.0 | 4305 | 119 | 17255 | 55 | 0.23 |
| R16-06 | 3/8" | 9.5 | 17.1 | 28.0 | 4060 | 112 | 16240 | 65 | 0.29 |
| R16-08 | 1/2" | 12.7 | 20.4 | 25.0 | 3550 | 98 | 14210 | 90 | 0.38 |
| R16-10 | 5/8" | 15.9 | 23.8 | 19.0 | 2780 | 77 | 11165 | 100 | 0.64 |
| R16-12 | 3/4" | 19.1 | 27.6 | 16.0 | 2275 | 63 | 9135 | 120 | 0.8 |
| R16-16 | 1" | 25.4 | 35.4 | 14.0 | 2030 | 56 | 8120 | 150 | 1.28 |
Sinopulse： Professional Hydraulic Hoses & Fittings Supplier you deserve depending on.
Raw Materials Management:
Original Source:
Our main raw materials are purchased from the top supplier in the international market, Like Sinopec， Samsung, BASF, and authoritative manufacturers in the domestic market.
Check after purchase:
Once a new batch of material is shipped to our factory, we will take samples to check them strictly according to our professional standards, if they can’t pass, the goods will be sent back.
Test beforehand with real production requirements.
We will combine relative materials according to our producing recipe to have an experiment and determine the production condition.
Fabrication Precess Management:
Equipment Improvement:
We focus on the development of manufacturing equipment, Join machines, Braiding machines, and Spiral machines. The key facilities have been iterated several times since we began to start our careers.
Quality Tracking Card:
Quality tracking card is exclusively dedicated to recording the key parameter in the fabrication process, every indicator must be controlled within the tolerance range of standards.
Pressure test and package
Pressure Test:
When the batch of hydraulic hose is finished, it must be tested under 2 times the working pressure for more than 30 seconds. If it passes the exam, it can be packed and shipped out. If not, It will be cut into an unfixed dimension for sale.
Package:
Our hydraulic hoses are normally packed with plastic films or woven bags.
Each package is labeled with detailed information on the product parameters, brand, name, diameter, length, and so on, products ID is included in case of checking.
SAE 100R1AT
SAE 100R1AT /EN 853 1SN Hydraulic Hose SAE 100R1AT / EN 853 1SN | 1-Wire Braided Hose | Single Steel Wire Braided Hydraulic Hose This
SAE 100R2AT
SAE 100R2AT / EN853 2SN Hydraulic Hose SAE 100R2AT / EN 853 2SN | 2-Wire Braided Hose | Double Steel Braided Hydraulic Hose SAE 100R2AT，
Pressure Washer Hose
WR1SN/WR2SN High Pressure Jet Washer Hose Pressure Washer Hose | Jet Washer Hose | WR1SN/WR2SN Jet washer hose is specially designed to use high-pressure water