1-FIBER BRAIDED HOSE | SINGLE BRAIDED HOSE | SAE 100R6 HYDRAULIC HOSE
SAE 100R6 is single fiber braid reinforcement hydraulic hose. Textile braid hydraulic hose are lightweight and flexible for low pressure hydraulic applications or as a return hose.
They are commonly used to transmit water-based fluids in hydraulic systems or petroleum-based hydraulic oils, glycol anti-freeze solution, water, diesel fuels and air.
SAE 100R6 Hydraulic Hose Features:
Inner rubber: oil resistant synthetic rubber.
Reinforcement: one high tensile polyester fiber braid.
cover: MSHA Certified, weather and oil resistant synthetic rubber,
Temperature range: -40℃ to + 100℃.
Safety Factor: 4:1;
Main application: very low pressure and low impulse hydraulic lines 20 to 35 bar, suitable for agricultural, stationary equipment, and hydraulic systems.
Recommended For: Petroleum-base hydraulic oils, water, glycol antifreeze solutions, engine lubricating oils, and air. Do not use for gasoline or diesel fuels.
SAE 100R6 Hydraulic Hose Specifications:
Sinopulse： Professional Hydraulic Hoses & Fittings Supplier you deserve depending on.
Raw Materials Management:
Our main raw materials are purchased from the top supplier in the international market, Like Sinopec， Samsung, BASF, and authoritative manufacturers in the domestic market.
Check after purchase:
Once a new batch of material is shipped to our factory, we will take samples to check them strictly according to our professional standards, if they can’t pass, the goods will be sent back.
Test beforehand with real production requirements.
We will combine relative materials according to our producing recipe to have an experiment and determine the production condition.
Fabrication Precess Management:
We focus on the development of manufacturing equipment, Join machines, Braiding machines, and Spiral machines. The key facilities have been iterated several times since we began to start our careers.
Quality Tracking Card:
Quality tracking card is exclusively dedicated to recording the key parameter in the fabrication process, every indicator must be controlled within the tolerance range of standards.
Pressure test and package
When the batch of hydraulic hose is finished, it must be tested under 2 times the working pressure for more than 30 seconds. If it passes the exam, it can be packed and shipped out. If not, It will be cut into an unfixed dimension for sale.
Our hydraulic hoses are normally packed with plastic films or woven bags.
Each package is labeled with detailed information on the product parameters, brand, name, diameter, length, and so on, products ID is included in case of checking.
SAE 100R3 Hydraulic Hose 2-FIBER BRAID HOSE |2-TEXTILE BRAID HOSE | SAE 100R3 SAE 100R3 is double fiber braid hydraulic hose for low pressure application.
SAE 100R4 Hydraulic Hose SAE 100R4 Hydraulic Hose | Suction and Return Hose | Helix Steel Wire Supported Hose SAE 100R4 is low pressure rubber