SAE 100R7 Thermoplastic Hydraulic Hose
SAE100 R7 thermoplastic hydraulic hose is designed to deliver synthetic, petroleum, and water-based hydraulic fluids at temperatures ranging from -40 °C to +100 °C. Because of the materials used, it is non-conductive. It is made up of three parts: the tube, the reinforcement, and the cover. Because the tube is made of high-quality, oil-resistant thermoplastic, it is widely used in the delivery of synthetic, petroleum, and water-based hydraulic fluids. The reinforcement is made of appropriate synthetic fiber, and the cover is made of high quality thermoplastic that is weather and hydraulic fluid resistant.
SAE 100R7 Thermoplastic Hydraulic HoseFeatures:
Inner tube: Oil resistant synthetic rubber;
Reinforcement: One braid of high tensile steel wire;
Cover: Weather and oil resistant synthetic rubber;
Main application: Suitable for convey low/medium pressure service with tight bends of oil/water based hydraulic fluids.
SAE 100R7 Thermoplastic Hydraulic Hose Specifications:
| Hose Type | I.D | O.D | W.P | B.P | B.R | W.T | |||
|---|---|---|---|---|---|---|---|---|---|
| Dash | Inch | mm | mm | Mpa | PSI | Mpa | PSI | mm | kg/m |
| R7-02 | 1/16" | 3.3 | 8.5 | 17.2 | 2494 | 69 | 9991 | 13 | 0.038 |
| R7-03 | 3/16" | 4.8 | 10.8 | 20.7 | 3002 | 83 | 11992 | 20 | 0.08 |
| R7-04 | 1/4" | 6.4 | 13.0 | 20.7 | 3002 | 83 | 11992 | 33 | 0.12 |
| R7-05 | 5/16" | 7.9 | 15.1 | 17.2 | 2494 | 69 | 9991 | 46 | 0.145 |
| R7-06 | 3/8" | 9.5 | 17.0 | 15.5 | 2248 | 62 | 9005 | 51 | 0.17 |
| R7-08 | 1/2" | 12.7 | 20.7 | 13.8 | 2001 | 55 | 8004 | 76 | 0.25 |
| R7-10 | 5/8" | 15.9 | 23.0 | 13.8 | 2001 | 55 | 8004 | 86 | 0.3 |
| R7-12 | 3/4" | 19.1 | 26.0 | 11.5 | 1668 | 45 | 6525 | 150 | 0.346 |
| R7-16 | 1" | 25.4 | 32.0 | 6.9 | 1001 | 28 | 4060 | 180 | 0.422 |
Sinopulse： Professional Hydraulic Hoses & Fittings Supplier you deserve depending on.
Raw Materials Management:
Original Source:
Our main raw materials are purchased from the top supplier in the international market, Like Sinopec， Samsung, BASF, and authoritative manufacturers in the domestic market.
Check after purchase:
Once a new batch of material is shipped to our factory, we will take samples to check them strictly according to our professional standards, if they can’t pass, the goods will be sent back.
Test beforehand with real production requirements.
We will combine relative materials according to our producing recipe to have an experiment and determine the production condition.
Fabrication Precess Management:
Equipment Improvement:
We focus on the development of manufacturing equipment, Join machines, Braiding machines, and Spiral machines. The key facilities have been iterated several times since we began to start our careers.
Quality Tracking Card:
Quality tracking card is exclusively dedicated to recording the key parameter in the fabrication process, every indicator must be controlled within the tolerance range of standards.
Pressure test and package
Pressure Test:
When the batch of hydraulic hose is finished, it must be tested under 2 times the working pressure for more than 30 seconds. If it passes the exam, it can be packed and shipped out. If not, It will be cut into an unfixed dimension for sale.
Package:
Our hydraulic hoses are normally packed with plastic films or woven bags.
Each package is labeled with detailed information on the product parameters, brand, name, diameter, length, and so on, products ID is included in case of checking.
Related Products
SAE 100R7
SAE 100R7 Thermoplastic Hydraulic Hose SAE 100R7 Thermoplastic Hydraulic Hose SAE100 R7 thermoplastic hydraulic hose is designed to deliver synthetic, petroleum, and water-based hydraulic fluids
SAE 100R8
SAE 100R8 Thermoplastic Hydraulic Hose SAE 100R8 Thermoplastic Hydraulic Hose SAE 100 R8 thermoplastic hydraulic hose is designed for delivering synthetic, petroleum, or water-based hydraulic